Carry Case This sturdy nylon carry
case will take good care of your microscope. Its closed cell foam liner provides
protection on all six sides. Dual Velcro straps hold your instrument safely
inside. Two inner pockets hold supplies and cords.
Inside dimensions:
15" High, 10" Wide, 7" deep
$49
Cleaning Kit
Kit contains:
Instruction Guide
8 oz. Air Duster
280 sheets lint-free lens paper
100 cotton-tipped applicators
1 oz. no-residue lens cleaning fluid
$30
Pro Service Kit
This kit has all of the necessary tools for routine adjustments, alignments,
and assembly:
Instruction Guide
8 oz. Air Duster
280 sheets lint-free lens paper
100 cotton-tipped applicators
1 oz. no-residue lens cleaning fluid
Microfiber Lens Cloth
Friction Collar Wrench
Soft-bristled Dusting Brush
Tube of Micro-Glide Gear Lubricant
3 Allen Wrenches - 1.5, 2.0, 2.5mm
Set of Six Precision Screwdrivers
Nylon Carry Case - 4x7x10 inches
$49
100x Objective
If you have an Observer III, or another scope with fine focus, you may want
to upgrade the scope to handle 1000x (with a 10x eyepiece). This is
an oil immersion lens. Due to the power
of lens, you will need a mechanical stage. If your scope is not equipped
with a mechanical stage, one can be ordered above. With the addition
of this lens, an Observer III scope becomes identical to an Observer IV.
Lens is Achromatic, color corrected, and conforms to the DIN standard.
Small bottle of immersion oil is included. (This lens is not
recommended for microscopes without fine focus.)
$79
Replacement Bulbs
12v 20w Halogen bulbs - 2 bulbs For the M1. These bulbs can
usually be found in Home Depot and Lowe's as well.
$30
Accessories for the M1 Binocular Microscope. Suitability for use with any other microscope is not
guaranteed.